Olympos Stucco
Cement-Based Decorative Wall Plaster System Applied with FOX DOMINO® MULTI FD785 and Shaped with the Marmorino Technique
Olympos Stucco
FOX OLYMPOS STUCCO is a cement-based decorative plaster system that can be burnished and patterned. Over the same primer and top-coat protection layers, the coating product and the application tool change according to the selected shaping technique; each technique produces its own distinctive surface texture.
Olympos Stucco Marmorino is the system applied with FOX DOMINO® MULTI FD785 and shaped with the Marmorino technique. Your choice of shaping technique determines the layer structure, the section drawing and the consumption; the colour is selected from the same FOX DOMINO® COLOR palette in every technique.
About Olympos Stucco Marmorino
The layers above and the products specified in them are given for standard conditions. For conditions outside the standard, please consult our technical service for system details and further information.
Technical Specifications
System Type
Cement-based decorative plaster system that can be burnished and patterned
Shaping Technique
Marmorino
Coating Product
FOX DOMINO® MULTI FD785
Coating Consumption
approx. 3 kg/m² (total)
Primer
FOX PRIMERA® FL220 (approx. 0.08 kg/m²) + FOX DECOPRIMER FL204 (approx. 0.30 kg/m²)
Top Coat Protection
FOX DOMINO® AC SEALER FD790, 2 coats, approx. 0.15 kg/m²
Colour
FOX DOMINO® COLOR palette: Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow, Lavanda
Area of Use
Interior and exterior walls
Application Temperature
+5 °C / +30 °C (ambient, surface and material)
Compressive Strength (28 days)
25–33,5 N/mm²
Flexural Strength (28 days)
7–9 N/mm²
Adhesion Strength
2,5 N/mm²
Application Thickness
1–3 mm per coat
Full Curing
28 days
Abrasive Paper
120 kum
Surface Protection (FD790)
Drying 6 hours, second coat after 4 hours; water-repellent, prevents dusting
System Layers
-
1
Primer
RequiredMain Product FOX PRIMERA® FL220~0.08 kg/m²General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces
Packaging1 lt20 lt10 lt5 lt -
2
Primer
RequiredMain Product FOX DECOPRIMER FL204~0.3 kg/m²Fast-drying, multi-purpose primer for decorative finish coat renders and microcement coatings
Packaging8 kg3 kg -
3
Coating
Required -
4
Dampening
RequiredMain Product FOX PRIMERA® FL220~0.05 kg/m²General-purpose, water-based, clear, universal primer for absorbent and highly absorbent surfaces
Packaging1 lt20 lt10 lt5 lt -
5
Coating
Required -
5A
Sanding
Between Layers120 Kum -
6
Top Coat
RequiredMain Product FOX DOMINO® AC SEALER FD790~0.15 kg/m²Akrilik esaslı, tek komponentli, su bazlı tozuma önleyici, su itici özellikte, son kat koruma malzemesi
Packaging5 kg
System Detail
| Stage | Product / Application Type | Consumption |
|---|---|---|
| Primer | FOX PRIMERA® FL220 | 0.08 kg/m² |
| Primer | FOX DECOPRIMER FL204 | 0.3 kg/m² |
| Coating | FOX DOMINO® MULTI FD785 | 1.5 kg/m² |
| Dampening | FOX PRIMERA® FL220 | 0.05 kg/m² |
| Coating | FOX DOMINO® MULTI FD785 | 1.5 kg/m² |
| Top Coat | FOX DOMINO® AC SEALER FD790 | 0.15 kg/m² |
Frames from Spaces
Application Gallery
System Products
Frequently Asked Questions
-
Which surfaces can Stucco be applied to?
It is applied to brick, block, concrete, fair-faced concrete, aerated concrete, gypsum plaster and gypsum concrete walls. The surface is freed from dust, oil and loose particles and made sound and dry; cracks and surface irregularities are repaired with suitable repair mortars. It is then primed with FOX PRIMERA® FL220 and FOX DECOPRIMER FL204. -
What sets the Marmorino technique apart from the other techniques?
All techniques use the same primer and protective layers; the difference lies in the coating product and the shaping tool. Two coats of FOX DOMINO® MULTI FD785 (1.5 kg/m²) are applied; once dry, the surface is sanded with 120 grit sandpaper to obtain a smooth marmorino texture. -
Can it be used outdoors?
Yes. The system is used on interior and exterior walls. Outdoors it must be protected from sun, rain, wind and frost for the first 24 hours; in hot weather the surface must be kept damp. -
How is the colour determined, and can it be changed later?
The colour comes from FOX DOMINO® COLOR pigment paste added to the mixing water of the coating layer; it is applied in Stone Grey, Olive Grey, Charcoal, Smoky, Cream, Oyster, Dale, Beige, Tortora, Cappuccino 25%, Cappuccino 50%, Brown 50%, Terracotta, Blue Nile, Marine, Avocado Green, Yellow and Lavanda. The surface can be renewed by applying a new coating layer over it. -
Can it be wiped clean, and how is it maintained?
The FOX DOMINO® AC SEALER FD790 top coat is water-repellent and prevents dusting; the surface can be wiped with a damp cloth. After application, the coating must be protected from direct contact with water for at least 24 hours. -
What are the application conditions?
The ambient, surface and material temperature must be between +5 °C and +30 °C. Materials are brought to site 1–2 days in advance so that they adapt to the ambient conditions; mixing is carried out with an electric mixer at 300–400 rpm. Consumption figures are given for ideal conditions at 23 °C; they increase on uneven surfaces and in cold weather.
Similar Systems
Metalage; a decorative coating system that gives walls and floors the look of solid metal with real metal pigments. From FOX BAU, with Copper, Bronze, Gold, Iron, Stannic and Rusty options.
Cement and polymer dispersion based, UV resistant, non-slip decorative coating system; two textures via trowel or textured basecoat, 10 colours.
Zeugma epoxy terrazzo: 9-11 mm, all RAL colours, Micro/Medium/Large aggregate, matt, semi-matt or gloss top coat.
Let's Work Together
Let us find the right solution for your space together
Fill in the form with your questions or project request; our team will contact you as soon as possible.
